Network Routers
LGR25(1000)
Intended for connection of BACnet networks and for integration of devices of third-party vendors.
| Bus: |
BACnet (Ethernet 10/100 Mbit/s), BACnet (arcnet 156 Kbit/s), BACnet (MS/TP 9,6-76,8 Kbit/s) |
| Ports: |
For system start-up and troubleshooting. Ïîðò RNET Supports up to four RS Standard sensors and one RS Plus, RS Pro, or RS Pro-F sensor for averaging or high/low select control. The sensors can share the Rnet port with a BACview6. For communication on EIA-232 or EIA-485. Communicates with the control module network using MS/TP (9600 bps–76.8 kbps) or a third-party device and protocol at various baud rates |
| Integration: |
25 (LGR25) or 1000 (LGR1000) data points of third-party vendor devices can be integrated into the system. |
| Processor: |
32-bit Motorola Power PC microprocessor with cache memory, Fast Ethernet controller, high performance 32-bit communication co-processor, ARCNET communication co-processor, and I/O expansion CAN co-processor |
| Memory: |
16 MB non-volatile battery-backed RAM (with 12 MB available for use), 8 MB Flash memory, 32-bit memory bus |
| Protection: |
Incoming power and network connections are protected by non-replaceable internal solid-state polyswitches that reset themselves when the condition that causes a fault returns to normal. The power and network connections are also protected against voltage transient and surge events |
| Environmental operating range: |
-20 to 140°F (-29 to 60°C), 10–90% RH non-condensing |
ME-LGR25(200)
Intended for handling several air handing units, central conditioners, heating units, lighting etc. and for connection of Bacnet networks and integration of third-party equipment.
| Bus: |
BACnet (Ethernet 10/100 Mbit/s), BACnet (arcnet 156 Kbit/s), BACnet (MS/TP 9,6-76,8 Kbit/s) |
| Ports: |
For system start-up and troubleshooting. Ïîðò RNET Supports up to four RS Standard sensors and one RS Plus, RS Pro, or RS Pro-F sensor for averaging or high/low select control. The sensors can share the Rnet port with a BACview6. For communication on EIA-232 or EIA-485. Communicates with the control module network using MS/TP (9600 bps–76.8 kbps) or a third-party device and protocol at various baud rates |
| Input/Output |
Up to 192 phisical points can be added using 6 expansion MEX or MX |
| Integration: |
25 (ME-LGR25) or 200 (ME-LGR200) data points of third-party vendor devices can be integrated into the system |
| Processor: |
32-bit Motorola Power PC microprocessor with cache memory, Fast Ethernet controller, high performance 32-bit communication co-processor, ARCNET communication co-processor, and I/O expansion CAN co-processor |
| Memory: |
16 MB non-volatile battery-backed RAM (with 12 MB available for use), 8 MB Flash memory, 32-bit memory bus |
| Protection: |
Incoming power and network connections are protected by non-replaceable internal solid-state polyswitches that reset themselves when the condition that causes a fault returns to normal. The power and network connections are also protected against voltage transient and surge events |
| Environmental operating range: |
-20 to 140°F (-29 to 60°C), 10–90% RH non-condensing |
|
Datasheet
| LGR25 |
 |
| LGR1000 |
|
| ME-LGR25 |
|
| ME-LGR200 |
|
 |
